Running A Full Node - Bitcoin

IdealCash

IdealCash deal coin is a Decentralized Digital Currency based on an Open-Source Peer-To-Peer Internet Protocol. It provides Proof-of-Stake (PoS) Block Generation Methods with separated target limits, granting everyone a 30% floating coin return rate! Also, transaction fee’s are extremely low, it’s only 0.0001 to transfer 10000000.00 coins!
[link]

How to run a Bitcoin Cash full node properly?

I would like to run a Bitcoin Cash full node to support the network.
I've done the following steps:
My client seemed to be syncing without any issue until the first Bitcoin Cash block (478558). After this block the the synchronization stopped. I haven't modified the default "Bitcoin-Qt.conf" file. My client is connected currently to 8 other nodes (6xBitcoin ABC, 1xBUCash and 1xBitcoinUnlimited). The debug log is huge it is about 100MB. At the end of the log file there are few messages like this:
AcceptBlockHeader: block is marked invalid
or [Net] Id: 1434 0 => 100 Ban threshold exceeded
Any idea why is my client stuck at block 478558?
submitted by abokq to btc [link] [comments]

Trying to get Bitcoin-Qt on OSX to read $HOME/.bitcoin/bitcoin.conf file

The GUI says it can't open the file, but it's clearly there. My main goal is to have the data and index on a separate disk.
submitted by george1421 to Bitcoin [link] [comments]

Trying to get Bitcoin-Qt on OSX to read $HOME/.bitcoin/bitcoin.conf file /r/Bitcoin

Trying to get Bitcoin-Qt on OSX to read $HOME/.bitcoin/bitcoin.conf file /Bitcoin submitted by BitcoinAllBot to BitcoinAll [link] [comments]

how to make transactions with 0 fee in bitcoin-qt? I've set 0 fee at configs and .conf file but whenever i send it sets an amount for fee.. (it's possible because blockchain.info wallet can do it)

submitted by intrd to Bitcoin [link] [comments]

[#94 Score:1 Comments:0] - can i still make transactions with 0 fee in bitcoin-qt? I've set 0 fee at configs and .conf file but whenever i send it sets an amount for fee..

submitted by Removal_Rover to remove [link] [comments]

Gridcoin 5.0.0.0-Mandatory "Fern" Release

https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/5.0.0.0
Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that.
Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap.
We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout.
Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.

Highlights

Protocol

Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now.
Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date.
The transition height is also when the team requirement will be relaxed for the network.

GUI

Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.

Blockchain

The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use.
There are so many goodies here it is hard to summarize them all.
I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures.
The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!

Summary Changelog

Accrual

Changed

Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.

Removed

Beacons

Added

Changed

Removed

Unaltered

As a reminder:

Superblocks

Added

Changed

Removed

Voting

Added

Changed

Removed

Detailed Changelog

[5.0.0.0] 2020-09-03, mandatory, "Fern"

Added

Changed

Removed

Fixed

submitted by jamescowens to gridcoin [link] [comments]

Bitcoin-qt datadir alternative storage location

I tried asking this in the bitcoincore sub yesterday, but it only has a handful of members and got no answers, so i now try here.
When bitcoin-qt is first started, it asks for the location of datadir. If it is set to a custom location, it remembers it on subsequent launches. Where is this location stored, as no bitcoin.conf is generated in the default location, and i have not seen any other documentation to specify datadir except command line option and bitcoin.conf file?
submitted by varikonniemi to Bitcoin [link] [comments]

PSA: Enable Tor as a simple way to make your node reachable.

Become one of the 10% of node operators that receive incoming connections.
Installing bitcoin core is easy, and with pruning it really isn't the space sink it is characterized as. Even a modest computer can complete the initial block download (IBD) and become a full node. But what some users (90%) find a bit more challenging, is how to become a listening node. Listening nodes are an important part of the network, and are simple enough to enable. I can think of 4 ways to do it:
  1. Operate on an OS and Network that support uPnP, allowing bitcoin to open the ports for you.
  2. Subscribe to a VPN that allows you to open ports through their service.
  3. Manually configure your OS and network to forward port 8333 and 18333.
  4. Run Tor and direct bitcoin to listen through it.
I'll discuss #4. Obviously #1 or #2 are easier, but require a VPN subscription or uPnP enabled HW. And if you live in a dorm or don't control the network, Tor may be the only free option available.
As a bit of background, bitcoin supports three networks that your node can listen on:
Obviously, the more you enable, the better, but here are the basic steps for Tor in broad strokes. If you have any questions post them here and I'll see if we can't help you out:
  1. Download, verify1 and install Gpg4win
  2. Download, verify2, install, and launch Tor Browser
  3. Download, verify3, install, and launch Bitcoin Core
  4. Launch and Admin command console in the directory containing tor.exe
  5. Install the Tor service: tor.exe --service install
  6. CD to service dir: cd %windir%\ServiceProfiles\LocalService\AppData\Roaming\tor
  7. Create and edit a file called torrc with the contents suggested below
  8. Restart tor: tor.exe --service stop && tor.exe --service start
  9. Record the hostname: type .\HiddenService\hostname as
  10. Add the bitcoin.conf options suggested below
  11. Restart the bitcoin-qt program
  12. (Optional) Activate the bitnodes crawler at https://bitnodes.io/nodes/-8333/
It may take a while for your node to show up on bitnodes. I've found the check button sometimes has trouble with onions. Of course you don't need to do it, but it can provide a simple way to check status once your on the list.

torrc file: (replace c:\windows with the proper path as needed)

```

Change to C:\Windows\ServiceProfiles\LocalService\AppData\Roaming

Log notice file \tor\service.log

Bridges may be needed if the Gov't shuts down Tor exit nodes. Get Bridges by

emailing [email protected] from Gmail (only) and uncomment as follows:

Bridge obfs4 : cert= iat-mode=

HiddenServiceDir \tor\HiddenService HiddenServiceVersion 2 HiddenServicePort 8333 127.0.0.1:8333 HiddenServicePort 18333 127.0.0.1:18333 ```

bitcoin.conf file: (entries to be ADDED)

```

Change to what you recorded earlier

onion=127.0.0.1:9050 listen=1 externalip= discover=1 ```
Footnotes:
  • 1 Cert: {Subject: Intevation GmbH; SHA1: c13a65963ad53e78694dd223d518007791a05fe4}
  • 2 PGP Signing Key: 0xEF6E286DDA85EA2A4BA7DE684E2C6E8793298290
  • 3 PGP Signing Key: 0x01EA5486DE18A882D4C2684590C8019E36C2E964
submitted by brianddk to Bitcoin [link] [comments]

Where does the Bitcoin-QT options dialog store options

When running Bitcoin-QT, there is an options dialog you can get to in the GUI under Settings. I've played with some of these settings and they don't store where I would expect. I've run some tests, on Windows 10, and it they are not housed in the bitcoin.conf file. What's more the settings persist if you change named conf files.
Is it housed in the registry or some other file on the filesystem?
submitted by brianddk to Bitcoin [link] [comments]

[ANN][ANDROID MINING][AIRDROP] NewEnglandcoin: Scrypt RandomSpike

New England
New England 6 States Songs: https://www.reddit.com/newengland/comments/er8wxd/new_england_6_states_songs/
NewEnglandcoin
Symbol: NENG
NewEnglandcoin is a clone of Bitcoin using scrypt as a proof-of-work algorithm with enhanced features to protect against 51% attack and decentralize on mining to allow diversified mining rigs across CPUs, GPUs, ASICs and Android phones.
Mining Algorithm: Scrypt with RandomSpike. RandomSpike is 3rd generation of Dynamic Difficulty (DynDiff) algorithm on top of scrypt.
1 minute block targets base difficulty reset: every 1440 blocks subsidy halves in 2.1m blocks (~ 2 to 4 years) 84,000,000,000 total maximum NENG 20000 NENG per block Pre-mine: 1% - reserved for dev fund ICO: None RPCPort: 6376 Port: 6377
NewEnglandcoin has dogecoin like supply at 84 billion maximum NENG. This huge supply insures that NENG is suitable for retail transactions and daily use. The inflation schedule of NengEnglandcoin is actually identical to that of Litecoin. Bitcoin and Litecoin are already proven to be great long term store of value. The Litecoin-like NENG inflation schedule will make NewEnglandcoin ideal for long term investment appreciation as the supply is limited and capped at a fixed number
Bitcoin Fork - Suitable for Home Hobbyists
NewEnglandcoin core wallet continues to maintain version tag of "Satoshi v0.8.7.5" because NewEnglandcoin is very much an exact clone of bitcoin plus some mining feature changes with DynDiff algorithm. NewEnglandcoin is very suitable as lite version of bitcoin for educational purpose on desktop mining, full node running and bitcoin programming using bitcoin-json APIs.
The NewEnglandcoin (NENG) mining algorithm original upgrade ideas were mainly designed for decentralization of mining rigs on scrypt, which is same algo as litecoin/dogecoin. The way it is going now is that NENG is very suitable for bitcoin/litecoin/dogecoin hobbyists who can not , will not spend huge money to run noisy ASIC/GPU mining equipments, but still want to mine NENG at home with quiet simple CPU/GPU or with a cheap ASIC like FutureBit Moonlander 2 USB or Apollo pod on solo mining setup to obtain very decent profitable results. NENG allows bitcoin litecoin hobbyists to experience full node running, solo mining, CPU/GPU/ASIC for a fun experience at home at cheap cost without breaking bank on equipment or electricity.
MIT Free Course - 23 lectures about Bitcoin, Blockchain and Finance (Fall,2018)
https://www.youtube.com/playlist?list=PLUl4u3cNGP63UUkfL0onkxF6MYgVa04Fn
CPU Minable Coin Because of dynamic difficulty algorithm on top of scrypt, NewEnglandcoin is CPU Minable. Users can easily set up full node for mining at Home PC or Mac using our dedicated cheetah software.
Research on the first forked 50 blocks on v1.2.0 core confirmed that ASIC/GPU miners mined 66% of 50 blocks, CPU miners mined the remaining 34%.
NENG v1.4.0 release enabled CPU mining inside android phones.
Youtube Video Tutorial
How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 1 https://www.youtube.com/watch?v=sdOoPvAjzlE How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 2 https://www.youtube.com/watch?v=nHnRJvJRzZg
How to CPU Mine NewEnglandcoin (NENG) in macOS https://www.youtube.com/watch?v=Zj7NLMeNSOQ
Decentralization and Community Driven NewEnglandcoin is a decentralized coin just like bitcoin. There is no boss on NewEnglandcoin. Nobody nor the dev owns NENG.
We know a coin is worth nothing if there is no backing from community. Therefore, we as dev do not intend to make decision on this coin solely by ourselves. It is our expectation that NewEnglandcoin community will make majority of decisions on direction of this coin from now on. We as dev merely view our-self as coin creater and technical support of this coin while providing NENG a permanent home at ShorelineCrypto Exchange.
Twitter Airdrop
Follow NENG twitter and receive 100,000 NENG on Twitter Airdrop to up to 1000 winners
Graphic Redesign Bounty
Top one award: 90.9 million NENG Top 10 Winners: 500,000 NENG / person Event Timing: March 25, 2019 - Present Event Address: NewEnglandcoin DISCORD at: https://discord.gg/UPeBwgs
Please complete above Twitter Bounty requirement first. Then follow Below Steps to qualify for the Bounty: (1) Required: submit your own designed NENG logo picture in gif, png jpg or any other common graphic file format into DISCORD "bounty-submission" board (2) Optional: submit a second graphic for logo or any other marketing purposes into "bounty-submission" board. (3) Complete below form.
Please limit your submission to no more than two total. Delete any wrongly submitted or undesired graphics in the board. Contact DISCORD u/honglu69#5911 or u/krypton#6139 if you have any issues.
Twitter Airdrop/Graphic Redesign bounty sign up: https://goo.gl/forms/L0vcwmVi8c76cR7m1
Milestones
Roadmap
NENG v1.4.0 Android Mining, randomSpike Evaluation https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/NENG_2020_Q3_report/NENG_2020_Q3_report.pdf
RandomSpike - NENG core v1.3.0 Hardfork Upgrade Proposal https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2020Q1_Report/Scrypt_RandomSpike_NENGv1.3.0_Hardfork_Proposal.pdf
NENG Security, Decentralization & Valuation
https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2019Q2_report/NENG_Security_Decentralization_Value.pdf
Whitepaper v1.0 https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/whitepaper_v1.0/NENG_WhitePaper.pdf
DISCORD https://discord.gg/UPeBwgs
Explorer
http://www.findblocks.com/exploreNENG http://86.100.49.209/exploreNENG http://nengexplorer.mooo.com:3001/
Step by step guide on how to setup an explorer: https://github.com/ShorelineCrypto/nengexplorer
Github https://github.com/ShorelineCrypto/NewEnglandCoin
Wallet
Android with UserLand App (arm64/armhf), Chromebook (x64/arm64/armhf): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.5
Linux Wallet (Ubuntu/Linux Mint, Debian/MX Linux, Arch/Manjaro, Fedora, openSUSE): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.3
MacOS Wallet (10.11 El Capitan or higher): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.2
Android with GNUroot on 32 bits old Phones (alpha release) wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0
Windows wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.3.0.1
addnode ip address for the wallet to sync faster, frequently updated conf file: https://github.com/ShorelineCrypto/cheetah_cpumineblob/mastenewenglandcoin.conf-example
How to Sync Full Node Desktop Wallet https://www.reddit.com/NewEnglandCoin/comments/er6f0q/how_to_sync_full_node_desktop_wallet/
TWITTER https://twitter.com/newenglandcoin
REDDIT https://www.reddit.com/NewEnglandCoin/
Cheetah CPU Miner Software https://github.com/ShorelineCrypto/cheetah_cpuminer
Solo Mining with GPU or ASIC https://bitcointalk.org/index.php?topic=5027091.msg52187727#msg52187727
How to Run Two Full Node in Same Desktop PC https://bitcointalk.org/index.php?topic=5027091.msg53581449#msg53581449
ASIC/GPU Mining Pools Warning to Big ASIC Miners Due to DynDiff Algo on top of Scrypt, solo mining is recommended for ASIC/GPU miners. Further more, even for mining pools, small mining pool will generate better performance than big NENG mining pool because of new algo v1.2.x post hard fork.
The set up configuration of NENG for scrypt pool mining is same as a typical normal scrypt coin. In other word, DynDiff on Scrypt algo is backward compatible with Scrypt algo. Because ASIC/GPU miners rely on CPU miners for smooth blockchain movement, checkout bottom of "Latest News" section for A WARNING to All ASIC miners before you decide to dump big ASIC hash rate into NENG mining.
(1) Original DynDiff Warning: https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708 (2) New Warning on RandomSpike Spike difficulty (244k) introduced in RandomSpike served as roadblocks to instant mining and provide security against 51% attack risk. However, this spike difficulty like a roadblock that makes big ASIC mining less profitable. In case of spike block to be mined, the spike difficulty immediately serve as base difficulty, which will block GPU/ASIC miners effectively and leave CPU cheetah solo miners dominating mining almost 100% until next base difficulty reset.
FindBlocks http://findblocks.com/
CRpool http://crpool.xyz/
Cminors' Pool http://newenglandcoin.cminors-pool.com/
SPOOL https://spools.online/
Exchange
📷
https://shorelinecrypto.com/
Features: anonymous sign up and trading. No restriction or limit on deposit or withdraw.
The trading pairs available: NewEnglandcoin (NENG) / Dogecoin (DOGE)
Trading commission: A round trip trading will incur 0.10% trading fees in average. Fees are paid only on buyer side. buy fee: 0.2% / sell fee: 0% Deposit fees: free for all coins Withdraw fees: ZERO per withdraw. Mining fees are appointed by each coin blockchain. To cover the blockchain mining fees, there is minimum balance per coin per account: * Dogecoin 2 DOGE * NewEnglandcoin 1 NENG
Latest News Aug 30, 2020 - NENG v1.4.0.5 Released for Android/Chromebook Upgrade with armhf, better hardware support https://bitcointalk.org/index.php?topic=5027091.msg55098029#msg55098029
Aug 11, 2020 - NENG v1.4.0.4 Released for Android arm64 Upgrade / Chromebook Support https://bitcointalk.org/index.php?topic=5027091.msg54977437#msg54977437
Jul 30, 2020 - NENG v1.4.0.3 Released for Linux Wallet Upgrade with 8 Distros https://bitcointalk.org/index.php?topic=5027091.msg54898540#msg54898540
Jul 21, 2020 - NENG v1.4.0.2 Released for MacOS Upgrade with Catalina https://bitcointalk.org/index.php?topic=5027091.msg54839522#msg54839522
Jul 19, 2020 - NENG v1.4.0.1 Released for MacOS Wallet Upgrade https://bitcointalk.org/index.php?topic=5027091.msg54830333#msg54830333
Jul 15, 2020 - NENG v1.4.0 Released for Android Mining, Ubuntu 20.04 support https://bitcointalk.org/index.php?topic=5027091.msg54803639#msg54803639
Jul 11, 2020 - NENG v1.4.0 Android Mining, randomSpike Evaluation https://bitcointalk.org/index.php?topic=5027091.msg54777222#msg54777222
Jun 27, 2020 - Pre-Announce: NENG v1.4.0 Proposal for Mobile Miner Upgrade, Android Mining Start in July 2020 https://bitcointalk.org/index.php?topic=5027091.msg54694233#msg54694233
Jun 19, 2020 - Best Practice for Futurebit Moonlander2 USB ASIC on solo mining mode https://bitcointalk.org/index.php?topic=5027091.msg54645726#msg54645726
Mar 15, 2020 - Scrypt RandomSpike - NENG v1.3.0.1 Released for better wallet syncing https://bitcointalk.org/index.php?topic=5027091.msg54030923#msg54030923
Feb 23, 2020 - Scrypt RandomSpike - NENG Core v1.3.0 Relased, Hardfork on Mar 1 https://bitcointalk.org/index.php?topic=5027091.msg53900926#msg53900926
Feb 1, 2020 - Scrypt RandomSpike Proposal Published- NENG 1.3.0 Hardfork https://bitcointalk.org/index.php?topic=5027091.msg53735458#msg53735458
Jan 15, 2020 - NewEnglandcoin Dev Team Expanded with New Kickoff https://bitcointalk.org/index.php?topic=5027091.msg53617358#msg53617358
Jan 12, 2020 - Explanation of Base Diff Reset and Effect of Supply https://www.reddit.com/NewEnglandCoin/comments/envmo1/explanation_of_base_diff_reset_and_effect_of/
Dec 19, 2019 - Shoreline_tradingbot version 1.0 is released https://bitcointalk.org/index.php?topic=5121953.msg53391184#msg53391184
Sept 1, 2019 - NewEnglandcoin (NENG) is Selected as Shoreline Tradingbot First Supported Coin https://bitcointalk.org/index.php?topic=5027091.msg52331201#msg52331201
Aug 15, 2019 - Mining Update on Effect of Base Difficulty Reset, GPU vs ASIC https://bitcointalk.org/index.php?topic=5027091.msg52169572#msg52169572
Jul 7, 2019 - CPU Mining on macOS Mojave is supported under latest Cheetah_Cpuminer Release https://bitcointalk.org/index.php?topic=5027091.msg51745839#msg51745839
Jun 1, 2019 - NENG Fiat project is stopped by Square, Inc https://bitcointalk.org/index.php?topic=5027091.msg51312291#msg51312291
Apr 21, 2019 - NENG Fiat Project is Launched by ShorelineCrypto https://bitcointalk.org/index.php?topic=5027091.msg50714764#msg50714764
Apr 7, 2019 - Announcement of Fiat Project for all U.S. Residents & Mobile Miner Project Initiation https://bitcointalk.org/index.php?topic=5027091.msg50506585#msg50506585
Apr 1, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50417196#msg50417196
Mar 27, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50332097#msg50332097
Mar 17, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50208194#msg50208194
Feb 26, 2019 - Community Project - NewEnglandcoin Graphic Redesign Bounty Initiated https://bitcointalk.org/index.php?topic=5027091.msg49931305#msg49931305
Feb 22, 2019 - Dev Policy on Checkpoints on NewEnglandcoin https://bitcointalk.org/index.php?topic=5027091.msg49875242#msg49875242
Feb 20, 2019 - NewEnglandCoin v1.2.1 Released to Secure the Hard Kork https://bitcointalk.org/index.php?topic=5027091.msg49831059#msg49831059
Feb 11, 2019 - NewEnglandCoin v1.2.0 Released, Anti-51% Attack, Anti-instant Mining after Hard Fork https://bitcointalk.org/index.php?topic=5027091.msg49685389#msg49685389
Jan 13, 2019 - Cheetah_CpuMiner added support for CPU Mining on Mac https://bitcointalk.org/index.php?topic=5027091.msg49218760#msg49218760
Jan 12, 2019 - NENG Core v1.1.2 Released to support MacOS OSX Wallet https://bitcointalk.org/index.php?topic=5027091.msg49202088#msg49202088
Jan 2, 2019 - Cheetah_Cpuminer v1.1.0 is released for both Linux and Windows https://bitcointalk.org/index.php?topic=5027091.msg49004345#msg49004345
Dec 31, 2018 - Technical Whitepaper is Released https://bitcointalk.org/index.php?topic=5027091.msg48990334#msg48990334
Dec 28, 2018 - Cheetah_Cpuminer v1.0.0 is released for Linux https://bitcointalk.org/index.php?topic=5027091.msg48935135#msg48935135
Update on Dec 14, 2018 - NENG Blockchain Stuck Issue https://bitcointalk.org/index.php?topic=5027091.msg48668375#msg48668375
Nov 27, 2018 - Exclusive for PC CPU Miners - How to Steal a Block from ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48258465#msg48258465
Nov 28, 2018 - How to CPU Mine a NENG block with window/linux PC https://bitcointalk.org/index.php?topic=5027091.msg48298311#msg48298311
Nov 29, 2018 - A Warning to ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708
Disclosure: Dev Team Came from ShorelineCrypto, a US based Informatics Service Business offering Fee for service for Coin Creation, Coin Exchange Listing, Blockchain Consulting, etc.
submitted by honglu69 to NewEnglandCoin [link] [comments]

Bitcoin Tor

Subject: PSA: Make your node reachable by using Tor
There is usually a post every few months with someone asking for tips on how to make their node reachable. It's always a hard question to answer since its impossible to know what type of routers and firewalls they are going to have to punch through. This is especially difficult in college dorms. One cheap (and easy) way around it is to to just jump through a few extra steps to make your bitcoin node a bitcoin onion node. Tor is great about traversing routers and firewalls like a hot knife through butter.
  1. Download, verify1, install and initialize Gpg4win
  2. Download, verify2, install, and launch Tor Browser
  3. Download, verify3, install, and launch Bitcoin Core
  4. Launch an Admin command console in the directory with tor.exe
  5. Install the Tor service: tor.exe --service install
  6. CD to service dir: cd %windir%\ServiceProfiles\LocalService\AppData\Roaming\tor
  7. Create and edit a file called torrc with the contents suggested below
  8. Restart tor: tor --service stop && tor --service start
  9. Record your onion hostname: type .\HiddenService\hostname as
  10. Add the bitcoin.conf options suggested below
  11. Restart the bitcoin-qt program
  12. Verify node connectivity at https://bitnodes.io/nodes/-8333/

torrc file: (replace c:\windows with the proper path as needed)

```

Change to C:\Windows\ServiceProfiles\LocalService\AppData\Roaming

Log notice file \tor\service.log HiddenServiceDir \tor\HiddenService HiddenServiceVersion 2 HiddenServicePort 8333 127.0.0.1:8333 HiddenServicePort 18333 127.0.0.1:18333 ```

bitcoin.conf file: (entries to be ADDED)

```

Change to what you recorded earlier

onion=127.0.0.1:9050 listen=1 externalip= discover=1 ```
Footnotes:
  • 1 - Cert-Subject: "Intevation GmbH"  ;  Cert-SHA1: c13a65963ad53e78694dd223d518007791a05fe4
  • 2 - PGP Signing Key: 0xEF6E286DDA85EA2A4BA7DE684E2C6E8793298290
  • 3 - PGP Signing Key: 0x01EA5486DE18A882D4C2684590C8019E36C2E964
submitted by brianddk to brianddk [link] [comments]

Please help a noob: Using bitcoind when I already have a full node on Bitcoin-qt (GUI)

Apologies if this has already been covered here (I couldn't find it) but if I am already running a full node using Bitcoin Core GUI and now want to use bitcoind or bitcoin-cli, do I need to download the whole thing all over again on command line? If I run bitcoind on command line it appears to do so. It could take days.
submitted by niranjanrao1 to Bitcoin [link] [comments]

Connecting bitcoin-qt to bitcoind on local network

Hello,
I have a bitcoin node running on a headless box (bitcoind) and I would like to connect to it using bitcoin-qt on my desktop. I'm getting a little confused with the process.... does bitcoin-qt need to connect to bitcoind using RPC? Do I store my wallet file on the bitcoind box, or bitcoin-qt box?
The bitcoin node is already setup to work with an electrum server, so I already have rpcbind=0.0.0.0, rpcallowip=$ELECTRUX_IP, and rpcuserpcpassword set. I tried adding my desktop IP to rpcallowip, and setting the appropriate username/password in bitcoin-qt's bitcoin.conf, but no luck. I can see in debug.log for bitcoin-qt that the connection is rejected.

The node runs over TOR and I have onlynet=onion set in bitcoind's bitcoin.conf, but that doesn't seem to stop electrumx connecting via RPC over clearnet, so this shouldn't be an issue right?

Am I missing something here? Help would be much appreciated!
submitted by backfromBTCpast to Bitcoin [link] [comments]

In case you're having trouble running Bisq with a local Bitcoin full node.

peerbloomfilters=1
That's the additional line entry I had to add to my bitcoin.conf file for Bitcoin-Qt 1.2.5 to work with Bisq.
Until I did that, Bisq kept repeatedly failing to connect and trying again. A search on the Web didn't help. I only found other people posting the same problem, looking for a solution.
I finally got this tip from someone in the Bisq channel at Keybase chat application. After he told me, he said he'll also document it for others.
submitted by cooriah to bisq [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

I have a txindex question.

I set txindex=1 in the bitcoin.conf file and restarted Bitcoin-QT. I see it reindexing but it's taking days instead of hours to finish.
Meanwhile, I have to start up Bisq to finalize a trade before the trade times out. However, Bisq always connects to a local full node if it detects one and Bisq warns never to start it if your full node is not up to date yet.
So, here's my question. Can I shutdown Bitcoin-QT while it's still reindexing its local copy of the blockchain without consequences? Or, if I interrupt it before completion, am I corrupting my downloaded copy of the blockchain and I'll have to start over the full node setup?
submitted by cooriah to Bitcoin [link] [comments]

Issue upgrading my bitcoin node

Hello,
I'm trying to update my current node (v0.18.1.0). I'm running my node on Mac using an external HD.
Everything is on my HD except for the bitcoin.conf file and the Bitcoin Core icon in my Applications folder.
I was able to launch my node using the icon on my Application folder (bitcoin-qt) or using the command line (bitcoind)
Since I downloaded the new version (v0.19.0.1), I have the following issue:
When I launch my node using the icon on my Application folder (bitcoin-qt) everything is fine and the new version is running (using the data in my external HD), but when launch the node using the command line (bitcoind), it still launch the old version.
Is there a separate update from bitcoind? I've done some research online but I didn't find anything helpful.
Thank You!!!
***EDIT***
I have downloaded "bitcoin-0.19.0.1-osx64.tar.gz" which include the executable for bitcoind, bitcoin-cli, etc and replace the old ones by the new ones and everything looks fine!
submitted by germmmmmm to Bitcoin [link] [comments]

Bitcoin Noob Pretty Much Loses Life Savings To Misguided Impulse

I bought my bitcoins at Bitfloor. I have Bitcoin-QT client v.8.1 beta and it is done synchronizing, I copied the BitcoinQT generated address and pasted it in the Bitfloor withdraw window and hit "TRANSFER BTC" but I have no bitcoins in my wallet after the withdraw. It was registered on the network. Now I am sad with rage. Any suggestions would be appreciated: GO!
submitted by machinecloud to Bitcoin [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

Help wanted with solomining with USB Block Erupters

OK you're going to say I'm crazy for even trying but I still want to try solomine with my USB Block Erupters.
I used to mine with the Bitminter client and it reached the point when I hardly get any coins.
I tried CGminer but it says "no devices detected".
So plz tell me how I can solomine with these ASIC sticks.
I used this tutorial:
https://bitcointalk.org/index.php?topic=315477.0
submitted by tinus42 to BitcoinMining [link] [comments]

[PSA] Dogecoin Wallet version 1.4 released. You must update.

WARNING: DO NOT send your wallet.dat file or dogecoin folder to anyone. There have been reports of people offering to help others by asking them to send their files to them so they can help. DO NOT do this. Scam attempt picture
Always encrypt your wallet! I can't express this enough. You should use a strong password longer than 15 characters. This password should contain numbers, symbols, and some capitalization! There is no need to have your wallet open 24 hours a day. Open it only when you need it. See - 'Getting Started' on the side bar.
This entire post has been written to be as close to ELI5 (Explain it like I'm 5) as possible - By request! If anyone wants to add/fix/correct anything in this message, please send a message to the mods <<-- Click blue text.
All blue text in this post can be clicked on. The blue text is a link to a picture, site or download file.
A very important message/reminder below.
25 Jan 1.5 pre-releases have started.
http://www.reddit.com/dogecoin/comments/1uhpwf/dogecoin_for_mac_14_topic_thread/
OLD VERSIONS The 1.4 update for the dogecoin wallet has been released. This update addresses the block chain error that occurred. This update is mandatory meaning you have to do this update. Also further down the page you can read up about the block chain. You MUST make sure you're on the correct block chain and the old block chain has been removed.
For a Windows computer the version must be 1.4. - 1.4.1 just released! See below
For a Apple Mac Computer the version must be 1.4
Download links:
[Windows Download Link](https://github.com/dogecoin/dogecoin/releases/download/1.4/dogecoin-qt-v14-Win.zip) <<--Click to start download
Windows Download Link 1.4.1 UPDATED 19JAN
Mac Download Link <<--Click to start download
Mac users can join this thread if there are any problems
Android (phone): Please see This post
To update, simply download the new version from the download link above. Open the downloaded file and extract the contents of the downloaded file into any new folder or location on your computer. If you put the files into a folder you can name the folder anything you want but make sure you remember that this is the latest version of the software.
You don't have to remove your folder containing the old version of the wallet. You can place it in a folder called 'Old versions of dogecoin wallet' if you like.
Now you can click on the Dogecoin icon contained in the new folder to open your version 1.4 wallet.
What happens if I get an error when I open the new wallet?
An error was reported called "11DbException"
If this happens Download this file and place it in the same folder as your updated wallet. Open the file you just downloaded called "Dogecoin OPEN' and wait. This might take 2 or 3 minutes.
Also jtlarousse has found a solution that worked on Windows. Please follow carefully and make backups before starting.
Reebzy might have found a solution for Apple Mac
Blockchain fork 101: The block chain is a ledger or document created containing every transaction that has ever happened. This file can be quite large. Bitcoins ledger is over 15GB. At some point this document/ledger split into two separate documents known as a fork.
How do I know if I am on the right block chain?
Go to your newly updated dogecoin wallet and open it. Click on Help>>Debug next Observe the current block number
*Note the example numbers in the pictures might be out of date by the time you read them
Now go over to http://dogechain.info/chain/Dogecoin . This website is the official Dogecoin blockchain website. Check the block number they're reporting
The number you found in your wallet and the number reported on the website should close. There might be a difference of 100 blocks depending on when you last refreshed your wallet or how long it took for you to get from one step to the next step in this guide and if the dogechain website is lagging.
I'M NOT ON THE CORRECT BLOCK CHAIN
My numbers are very different. How do I get back onto the right block chain?
IMPORTANT
For windows:
1)Close down the Dogecoin wallet client.
2)Go to your data folder: C:\Users[your windows log-in name]\AppData\Roaming\DogeCoin
3)Delete the Dogecoin.conf file. Do not delete the wallet.dat file!
4)Download this update file and place it into the Dogecoin folder where the other file was deleted.
For Apple Mac:
1)Close down the Dogecoin wallet client.
2)Go to your data folder: ~/Libarary/Application Support/Dogecoin
3)Delete the Dogecoin.conf file. Do not delete the wallet.dat file!
4)Download this update file and place it into the Dogecoin folder where the other file was deleted.
Next visit this post by Netcodepool for instructions on how to manually download the correct block chain and install it.
Much Thanks. 
Edit: Some posts were removed from this thread. To limit confusion.
Check this post for details about mining pools that were/are using the wrong fork.
Did you send coins only to find out you're on the wrong chain? See this post to get them back
An Apple Mac support thread has been made by voidref (The mac developer). If you're having troubles please see this thread
Some shibes have reported their wallets wont sync. Please check to make sure your firewall, antivirus, malware scanner or similar programs are not blocking it the wallet. You can add rules to these programs to allow the wallet to make contact with the internet. It's not advised but possible to also disable the software for a short amount of time. Don't forget to enable the software again afterwards.
Is your wallet crashing? Try this helpful tip from gandhikahn or if you're using windows try the 1.4.1 update above.
submitted by 42points to dogecoin [link] [comments]

Understanding BIP149, redeployment of Segwit with BIP8

I recently published BIP149 and would like to take a few moments to explain the details of this proposal.
BIP149 is a completely new deployment of segwit, which I propose if the current BIP9/BIP141/143/147 segwit deployment fails to lockin/activate by November 15th.
BIP149 cannot be run on mainnet now, and there is code in the reference implementation to prevent it from running. It is incompatible with the current segwit deployment on purpose to remove unnecessary complications.
Essentially, the idea is, if the current segwit deployment fails to activate by Nov 15th, we can release new software that has BIP149. This uses BIP8 to activate segwit by July 2018. Miners will still be able to trigger activation by 95% threshold signalling as normal. In the 8 months from November to July 2018, nodes will be able to upgrade to BIP149. If segwit is not MASF activated by July 2018, there will be enough of the economy running BIP149 that nodes can begin enforcement. What will actually happen is on the first retarget after July 4th, the BIP8 state machine will switch to LOCKED_IN status for two weeks, and then on the following retarget, ACTIVATION will occur. The rationale here is in 5 months we achieved 70% saturation of witness capable nodes, so by the time segwit timesout with all the urgency and demand people feel for segwit, we can expect them to upgrade at least as fast, if not much faster. I have spoken with a number of developers who think this is a reasonable assumption.
Background, I had hoped to be able to release a BIP that can be deployed concurrently now with segwit, but, there are various technical complications in implementing it cleanly and making it easily reviewable. I had various feedback from others in previous iterations and in order to get the widest support from developers especially concerned with predictable results and thus safety, I came to the conclusion that the BIP will get the widest support by not attempting any shortcuts and by removing all complexity. I know many people want segwit now, but, I think we should just bite the bullet and do it the BIP149 way. I already made a shortcut BIP with BIP148. I will discuss the pros and cons at the end.
Back to BIP149, this is a completely new redeployment with a new service bit NODE_UAWITNESS and new compact block protocol version - doing this avoids many gotchyas which I will explain below:
Currently, segwit capable nodes advertize the NODE_WITNESS service bit and preferentially peer with other NODE_WITNESS nodes. Post activation, segwit-active nodes will then know who they should relay witness blocks to and who they should relay old style stripped blocks to. The assumption is if I am a NODE_WITNESS node and segwit has activated, then other NODE_WITNESS nodes will also be segwit activated. We cannot reuse NODE_WITNESS because when BIP149 activates, they would believe non-BIP149 NODE_WITNESS nodes were also active. Using a new service bit, and effectively starting a new deployment as if the previous deployment doesnt exist, is the most predictable and trouble free way to go about it.
Additionally, BIP149 is compatible with existing mining software by reusing the "segwit" name and deployment chainparams (it's not possible to have two deployments with the same name, one expired and one pending/active, due to how versionbits is implemented). In short, if the current segwit deployment fails to activate, we can reuse parts to maintain compatibility, while changing the bare minimum to remove any conflicts with old nodes. It's clean, predictable and easy to review.
BIP148 IS NOT BIP149
Remember BIP148 is exceptional, it's NOT what a usual UASF BIP should look like. A normal UASF if effectively activation on a predetermined date in the future (a flag day). BIP8 combines BIP9 miner signalling with a flagday if MASF does not occur.
How is BIP149 different to BIP148? So BIP148 is a UASF which can be used in two ways. (a) The economy can run BIP148 and basically force miners to signal for segwit, thus activating the current segwit deployment. Or, (b) a majority of miners, 60% or so, could run it and censor other miners who do not signal segwit, thus causing the current segwit to deploy. In method (a) a chain split will occur if any miners do not upgrade, and given the fact there are always absentee miners and pool operators, this is quite likely. It's the economy vs hash power saying "if you dont signal, your blocks will not be worth anything because we will reject them". In the case of (b) you have a majority of hashpower, who could use their majority to orphan any non signalling miners. This isn't great but it's less disruptive than (a) because there is a majority hashpower definitely opted in.
BIP149 on the other had does not guarantee a chain split since that could only happen if a miner deliberately takes action to manually create a segwit invalid block, which would be rejected by the economy. The incentives are different also, with BIP148 a chainsplit comes for free, regardless of if it lasts long or not. In BIP149, a miner would have to specifically take action to split and waste their money, which they could do at any time anyway. BIP149 is uncontroversial in the sense it is just a redeployment with guaranteed activation at the end, for a soft fork we are fairly sure people want and will upgrade to. The evidence is everywhere. UASFs deployed over a long time and a decent flagday are perfectly safe - all soft forks are enforced by nodes, even if activation is triggered by hashpower.
Anyway, we've got 8 months from now to review and think about BIP149 - it cannot be deployed until November. If you would like to show support for BIP149, feel free to add the following to your bitcoin.conf
uacomment=UASF-SegWit-BIP149 
Note you can have multiple uacomments like:
uacomment=BIP8 uacomment=UASF-SegWit-BIP149 uacomment=UASF-SegWit-BIP148 
You can find the bitcoin.conf file here
You can also just add this to a shortcut - create a shortcut (or edit the existing one you use) and add this to the end: -uacomment=UASF-SegWit-BIP149
e.g. (just add the property to the end like this):
"C:\Program Files\Bitcoin\bitcoin-qt.exe" -uacomment=UASF-SegWit-BIP149 if you are using Windows.
You can also just add uacomments as multiple command line/shortcut arguments like
-uacomment=BIP8 -uacomment=UASF-SegWit-BIP149 -uacomment=UASF-SegWit-BIP148 
Then you can check here to see how your node is signalling at https://bitnodes.21.co/ will show something like: xxx.xxx.xxx.xxx:8333 /Satoshi:0.14.1(UASF-SegWit-BIP149)/
If your node has synced and doesn't show using the link above make sure to enable forwarding of port 8333 so you accept incoming connections (if you want to that is) - in your client: go into settings / network and tick enable incoming connections and use upnp. You might have to add it to your firewall if this doesn't work. [taken from this user comment].
Read the BIP https://github.com/bitcoin/bips/blob/mastebip-0149.mediawiki
See the implementation https://github.com/bitcoin/bitcoin/compare/master...shaolinfry:uasegwit-flagday
submitted by shaolinfry to Bitcoin [link] [comments]

9. bitcoind Ubuntu -1 Setting up Bitcoin How to recover funds from a currupted bitcoin wallet Bitcoin JSON-RPC Tutorial 3 - bitcoin.conf - YouTube Inflationcoin (IFLT) wallet configuration

The Bitcoin Core daemon (bitcoind) is not included in the .dmg file you may have downloaded to install Bitcoin-QT. Bitcoind, along with its support binaries, is instead included in the OS X .tar.gz file listed on the official Bitcoin Core download page. To download this file using Terminal, execute the following command: On my mac the bitcoin.conf file doesn't exist. I'm not sure if simply creating it will cause it to be used by bitcoin-qt – portforwardpodcast Mar 6 '15 at 1:46. 3. @portforwardpodcast: Bitcoin Core will check for the existence of the file on startup, so yes, simply creating it is sufficient. – Murch ♦ Nov 1 '16 at 21:05. I use Linux Ubuntu(16.04 LTS) and i've found file /root/.config ... The above one is the default file path for Bitcoin and this is the data directory where you should find all your cryptocurrency wallet core files. Within each coin folder there will be a .conf file located. Bitcoin software has both a graphical interface called bitcoin-qt and a console interface, bitcoind. If the first is convenient for human use, then without a text it is quite difficult to make an online store or any other service that accepts bitcoins as a payment. About it and speech will go. To work you need to run one instance of bitcoin as a daemon, so he worked as a full-fledged host on ... 3 Bitcoin.conf Configuration File; 4 Sample Bitcoin.conf; 5 Platforms. 5.1 Windows. 5.1.1 Start automatically; 5.1.2 Batch automation; 5.2 Mac; 5.3 Linux; 6 See Also; Linux Quickstart. The simplest way to start from scratch with the command line client, automatically syncing blockchain and creating a wallet, is to just run this command (without arguments) from the directory containing your ...

[index] [33129] [1447] [18839] [420] [49272] [40023] [15555] [15176] [11061] [10449]

9. bitcoind

Ubuntu -1 Setting up Bitcoin Commands, sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install bitcoin-qt sudo apt-get install bitcoind sudo blkid sudo nano /etc/fstab ... Using salvagewallet to save a corrupt Bitcoin Wallet file - Duration: 7:55. Bitcoin Daytrader 1,303 views. 7:55. 8000 Bitcoin Wallet - Mined in 2009 and Never Moved - Duration: 6:54. ... JSON RPC Calls with Bitcoin qt (4 of 6) How to run a Bitcoin Full Node(Linux + Build from Source) - Duration: 14:13. ... Bitcoin JSON-RPC Tutorial 3 - bitcoin.conf - Duration: 8:10. m1xolyd1an Recommended for you. 8:10 . How To: Bitcoin ... We cover chapter 3 of Andreas Antonopoulos' book Mastering Bitcoin. Featured are examples of bitcoin-cli commands, and simple Python scripts to interact with the bitcoin blockchain. Referenced links:

#